Претраживање
Приказ резултата 11-20 од 100
Thermodynamic and transport properties of biodiesel and biodiesel and petro-diesel blends at high pressures. / Termodinamička i transportna svojstva biodizela i njihovih smješa sa dizel gorivom na visokim pritiscima
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In the doctoral dissertation the establishment of a new apparatus and the introduction of the procedure for the high pressure density measurements in the compressed liquid regions was presented. The operation of the apparatus ...
Modification of poly(methyl methacrylate) denture base materilas with diesters of itaconic acid / Modifikacija poli(metil metakrilatnih) materijala za baze zubnih proteza diestrima itakonske kiseline
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2012)
The aim of this work is to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain a higher degree of material biokompatibility. In the first part of this ...
Determination of anisomycin by liquid chromatography with tandem mass spectrometry and electrochemical methods and application to investigation of drug stability and its distribution in rat tissues / Određivanje anizomicina tečnom hromatografijom sa tandem masenom spektrometrijom i elektrohemijskim metodama i primena na ispitivanje stabilnosti leka i njegove raspodele u tkivima pacova
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Drug anisomycin is a potential immunosuppressant in low doses (≤ 0.1 μM). It also has the potential use as a psychopharmaceutical and an anticancerous drug, and in the recent investigations it was shown that it is a potential ...
Sinteza i karakterizacija polimernih hidrogelova na bazi akrilata za uklanjanje teških metala iz vodenih rastvora
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In the first part of this work hydrogels based on 2-hydroxyethyl acrylate and itaconic acid P(HEA/IA) were prepared by free radical cross-linking copolymerization. In order to investigate the influence of the hydrogel ...
Production of lactic acid and probiotic biomass on distillery stillage / Proizvodnja mlečne kiseline i probiotske biomase na destilerijskoj džibri
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Lactic acid is a significant chemical for food, cosmetic, pharmaceutical and chemical industry. Currently, Serbia imports lactic acid and utilization of distillery stillage, a waste water from bioethanol production, as a ...
Surface modification of cellulose fibers using dielectric barrier discharge / Modifikovanje površine celuloznih vlakana primenom dielektričnog barijernog pražnjenja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In the theoretical part of doctoral dissertation, the most significant literature data concerning cellulose structure and properties have been systematically reviewed. Special attention has been given to the possibilities ...
Production and characterization of nanocomposite hydrogels based on alginate and silver nanoparticles for biomedical applications / Dobijanje i karakterisanje nanokompozitnih hidrogelova na bazi alginata i nanočestica srebra za primenu u biomedicini
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
Development of novel nanocomposite biomaterials for biomedical applications requires comprehensive evaluation and characterization of biomaterials such as determination of the chemical composition, physical properties, ...
Structure and properties of Al-Mg alloy sheets produced by accumulative roll bonding. / Struktura i svojstva višeslojnih Al-Mg traka dobijenih hladnim valjanjem
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
Influence of accumulative roll bonding (ARB) and conventional cold rolling (CR) on the mechanical and corrosion properties of an AA5083 type alloy with 4.2 wt% Mg and a modified alloy with 5.1 wt% Mg and addition of 0.5 ...
Obtaining of nanostructured powders for production of new dispersion strengthened sintered material in the system Cu-Al2O3 / Dobijanje nanostrukturnih prahova u cilju proizvodnje novih disperzno ojačanih sinterovanih materijala u sistemu Cu-Al2O3
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2009)
This PhD thesis presents the possibility of nanostructured composite materials based on copper and alumina synthesis trough a new method, which is a combination of thermo-chemical synthesis and mechanical alloying. ...
Synthesis and characterization of hydrogels based on 2-hydroxyethyl acrylate and itaconic acid for controlled release of therapeutically active metal ions аpplication. / Sinteza i karakterizacija hidrogelova na bazi 2-hidroksietil akrilata i itakonske kiseline za primenu u kontrolisanom otpuštanju terapeutski aktivnih jona metala
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2016)
In this doctoral dissertation, the novel polymeric materials were synthesized as carriers for the incorporation and controlled release of therapeutically active metal ions, for the application in wound treatment and soft ...