Претраживање
Приказ резултата 61-70 од 219
Controlled Curcumin Release from Hydrogel Scaffold Platform Based on 2-Hydroxyethyl Methacrylate/Gelatin/Alginate/Iron(III) Oxide
(Wiley-VCH Verlag Gmbh, Weinheim, 2020)
The strategy of combining polymers of natural and synthetic origin with inorganic components to use their unique synergistic effect for the development of the novel, sophisticated, and efficient 3D polymeric biomaterials, ...
Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air
(Elsevier Science Sa, Lausanne, 2019)
The similar to 60 nm wide and similar to 2 mu m long TiO2 nanotubes were obtained by anodization of Ti films sputtered on F-doped tin oxide glass. For N-doping the samples were annealed in ammonia atmosphere. The effect ...
The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate
(Taylor & Francis Ltd, Abingdon, 2019)
Adhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by "hot pressing" method. Alumina-based particles were made ...
Solvatochromism and quantum mechanical investigation of disazo pyridone dye
(Wiley, Hoboken, 2018)
Disazo pyridone dye, 4-methyl-2,6-dioxo-5-(2-(4-(phenyldiazenyl)phenyl)hydrazono)-1,2,5,6-tetrahydropyridine-3-carbonitrile, is synthesised and thoroughly characterised by a combination of experimental and computational ...
Enhanced absorption of TiO2 nanotubes by N-doping and CdS quantum dots sensitization: insight into the structure
(Royal Soc Chemistry, Cambridge, 2018)
Anodization of titanium film sputtered on fluorine doped tin oxide (FTO) glass was performed to obtain highly ordered approximate to 2 m long and approximate to 60 nm wide TiO2 nanotubes. The titania films were annealed ...
Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers
(Public Library Science, San Francisco, 2019)
The processing and characterization of hybrid PMMA resin composites with nano-zirconia (ZrO2) and electrospun polystyrene (PS) polymer fibers were presented in this study. Reinforcement was selected with the intention to ...
Wheat Straw Degradation by Trametes gibbosa: The Effect of Calcium Ions
(Springer, Dordrecht, 2018)
Wheat straw is the major crop residue in Europe which makes it the most promising material for bioconversion. However, only 3% of annual production is used directly while the rest is considered as waste. A key step in ...
Spatial and temporal distribution of pollution indices in marine surface sediments-a chemometric approach
(Environmental Science and Pollution Research, 2021)
Concentrations of As, Cd, Cr, Cu, Hg, Mn, Ni, Pb, Zn, and Fe measured at forty locations in the Boka Kotorska Bay were used to monitor the spatial and temporal quality of sediment and to assess surface sediment contamination ...