Претраживање
Приказ резултата 11-20 од 82
Visible light-harvesting of TiO2 nanotubes array by pulsed laser deposited CdS
(Elsevier Science Bv, Amsterdam, 2014)
Titanium dioxide (TiO2) nanotubes arrays, obtained by anodization technique and annealing, were decorated with CdS using pulsed laser deposition method. Their structural, morphological and chemical characterization was ...
Purification technologies for crude biodiesel obtained by alkali-catalyzed transesterification
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
For commercial application, the ester product of alkali-catalyzed transesterification of vegetable oil or animal fats should be refined after glycerol separation by settling to fulfill the biodiesel standard specifications. ...
Rapid cationic dye adsorption on polyphenol-extracted coffee grounds-A response surface methodology approach
(Elsevier Science Bv, Amsterdam, 2014)
The Box-Behnken design under the response surface methodology (RSM) with five interacting parameters (adsorbent dose, initial dye concentration, time of agitation, initial solution pH and time of the adsorbent microwave ...
Aramid composites impregnated with different reinforcement: Nanofibers, nanoparticles and nanotubes / Aramidni kompoziti impregnisani sa različitim ojačanjima - nanovlakna, nanočestice i nanocevi
(Engineering Society for Corrosion, Belgrade, Serbia, 2014)
In this study, the electrospun nanofibers, nanoparticles and nanotubes were used as reinforcement in order to improve mechanical properties of materials for ballistic protection. The samples of polyurethane/p-aramid ...
Modification of natural clinoptilolite for nitrate removal from aqueous media
(Srpsko hemijsko društvo, Beograd, 2014)
Natural zeolitic tuff from the Zlatokop mine (Vranjska Banja deposit, Serbia) was investigated as the starting material to obtain a low cost adsorbent for the removal of nitrate from aqueous media. The tuff rich in zeolite, ...
Ballistic Properties of Hybrid Thermoplastic Composites with Silica Nanoparticles
(Inda, Cary, 2014)
Multi-axial aramid fabrics have a wide range of applications in the construction of composite structures for body armor. Nanoparticles, which include nanosilica, are one of the most common nanofillers for these structures. ...
Novel Bioactive Antimicrobial Lignin Containing Coatings on Titanium Obtained by Electrophoretic Deposition
(MDPI, Basel, 2014)
Hydroxyapatite (HAP) is the most suitable biocompatible material for bone implant coatings; its brittleness, however, is a major obstacle, and the reason why research focuses on creating composites with biopolymers. ...
Arsenate adsorption on waste eggshell modified by goethite, alpha-MnO2 and goethite/alpha-MnO2
(Elsevier Science Sa, Lausanne, 2014)
An efficient adsorbents for arsenate removal was developed by modification of calcined eggshell with goethite (calcined eggshell/goethite; sorbent 1), alpha-MnO2 (calcined eggshell/alpha-MnO2; sorbent 2) and hybride system ...
Structure and magnetic properties of electrodeposited Ni87.3Fe11.3W1.4 alloy
(Elsevier, Amsterdam, 2014)
A dark gray nanostructured coating of an alloy composed of 87.3 wt.% Ni, 11.3 wt.% Fe and 1.4 wt.% W (Ni87.3Fe11.3W1.4) was electrodeposited from an ammonia citrate bath on a titanium cathode at a current density of 500 ...
Effect of Electrodeposition Current Density on the Microstructure and Magnetic Properties of Nickel-cobalt-molybdenum Alloy Powders
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Nanostructured nickel-cobalt-molybdenum alloy powders were electrodeposited from an ammonium sulfate bath. The powders mostly consist of an amorphous phase and a very small amount of nanocrystals with an mean size of less ...