Pretraživanje
Prikaz rezultata 21-30 od 77
Surface Patterning Increases Fluid Sorption Efficiency in Porous Reactive Coatings: A Model for Optimised Surface-Flow Filtration
(Transport in Porous Media, 2021)
A novel surface-flow filter has been designed to take advantage of a combination of both diffusion and lateral flow permeation, since active coatings, even if porous, tend to be far less permeable than through-flow constructs. ...
Thermodynamic and transport properties of biomass-derived furfural, furfuryl alcohol and their mixtures
(MDPI, 2021)
The limited reserves and well-known disadvantages of using fossil energy sources have increased the need for appropriate renewable substitutes in the production of various chemicals and materials. Biomass has been shown ...
Basalt-Polyester Hybrid Composite Materials for Demanding Wear Applications
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
Basalt as a filler in a polymer-based composite material fulfils the demand of being natural, environment-friendly material for the production of various composite materials. The material could be used as protective layer ...
Antibacterial Activity of pH-Sensitive Silver(I)/Poly(2-hydroxyethyl acrylate/itaconic acid) Hydrogels
(Polymer Soc Korea, Seoul, 2020)
Since the management of infections becomes prior global healthcare issue, the "post antibiotic era" requires innovative and interdisciplinary approach. As an alternative to widespread and, nowdays mostly uneffective, ...
Inorganically modified particles FeAl-LDH"SiO2 as reinforcement in poly (methyl) methacrylate matrix composite
(Royal Society Open Science, 2021)
Silica particles were obtained from rice husk to which layered double hydroxide particles were deposited (weight ratio 1 : 1). Fe2+-Al3+ layered double hydroxides (FeAl-LDH) were synthesized by co-precipitation with ratios ...
Modification of hydrophilic polymer network to design a carrier for a poorly water-soluble substance
(Wiley, Hoboken, 2020)
pH sensitive, nontoxic, and biocompatible poly(methacrylic) acid (PMAA) based soft networks have been extensively used in the design of systems for targeted drug delivery. Still, their highly hydrophilic nature limits their ...
An Experimental Study of Mechanical Properties and Heat Transfer of Acrylic Composites with Structural and Surface Modified Al2O3 Particles
(International Institute for the Science of Sintering (IISS), 2020)
Thermal properties of acrylate-based composite combined with alumina-based particles were investigated. The composites were made of poly (methyl methacrylate) (PMMA) modified with dimethyl itaconate (DMI) as a matrix. Neat ...
Sn-doped TiO2 nanotubular thin film for photocatalytic degradation of methyl orange dye
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
We fabricated Sn-doped TiO2 nanotubular film via annealing of anodized TiO2 nanotubes grown on F-SnO2 (FTO) glass. Annealing was carried out at 500 degrees C in ambient air. Anatase crystal structure was achieved with no ...
Moisture absorption characteristics and effects on mechanical properties of Kolon/epoxy composites
(Current Applied Physics, 2021)
Para-aramid fibers (Kolon) are high performance polymeric fibers characterized by their high tenacity and impact resistance. They are used for the soft body armor structures in ballistics. In this study, the testing specimens ...
Predicting liquid chromatography−electrospray ionization/mass spectrometry signal from the structure of model compounds and experimental factors; case study of aripiprazole and its impurities
(Elsevier B.V., 2023)
A priori estimation of analyte response is crucial for the efficient development of liquid chromatography–electrospray ionization/mass spectrometry (LC–ESI/MS) methods, but remains a demanding task given the lack of knowledge ...