Претраживање
Приказ резултата 21-30 од 43
Examination of the adhesion of polymer composite films based on Bis-GMA/TEGDMA on different metal substrates / Ispitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ...
Sorption of textile dyes from textile wastewater by chitosan-based hydrogel / Sorpcija boja za tekstil iz tekstilnih otpadnih voda pomoću hidrogela na bazi hitozana
(Savez inženjera i tehničara Srbije, Beograd, 2018)
With the excessive risks that are present in today's environment, it is of great importance to treat wastewaters before their discharge in water streams. One of the everyday challenges is design of a low-cost and environmentally ...
Synthesis and properties of nano-hydroxyapatite/poly (methacrylic acid) composite hydrogels / Uticaj neutralizacije na svojstva poroznih hidrogelova na bazi hidroksiapatita i poli(metakrilne kiseline) sintetisanih slobodno-radikalskom polimerizacijom
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Goals. The goal of this study was a development of biocompatible composite hydrogels, structurally similar to native bone tissue, by incorporation of ~60 wt % of calcium hydroxyapatite (HA) into a matrix of hydrogels. Also, ...
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...
Application of alumosilicate polymers based on metakaolin in adsorption of cadmium ions from wastewater / Primena alumosilikatnih polimera na bazi metakaolina u adsorpciji jona kadmijuma iz otpadnih voda
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Alumosilicate polymers (geopolymers) based on metakaolin as precursor and alkaline activators of different concentrations (2M, 4M, 6M and 8M NaOH/Na2SiO3) were used to remove ions of cadmium from wastewater. Experiments ...
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
Optimization of chitosan gel preparation for supercritical impregnation of thymol / Uticaj pripreme hitozan gelova na natkritičnu impregnaciju sa timolom
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The impregnation of differently prepared chitosan gels with thymol using supercritical carbon dioxide (scCO2) was studied in order to obtain new materials with added value without the use of organic solvents. The optimum ...
Fluorescence analysis of liposomal membranes permeability / Fluorimetrijska analiza permeabilnosti lipozomalnih membrana
(Savez inženjera i tehničara Srbije, Beograd, 2019)
The present study provides insight into changes in the liposomal membrane fluidity as a result of variation of structural components (two types of standard phospholipids - 1,2-dipalmitoyl-sn-glycerero3-phosphocholine, i.e. ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...