Претраживање
Приказ резултата 41-50 од 101
Reduction of volatile organic compounds emissions in crude oil industry by cleaner production principles. / Smanjenje emisija lakoisparljivih organskih jedinjenja u industriji prerade nafte primenom čistije proizvodnje
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
Crude oil and its derivates are a significant source of VOC, i.e., volatile organic compounds. A goal of this research is to set a base for VOC emission reduction through engineering design and proactive actions as a cleaner ...
Micromechanical properties and thermal stability of adhesives for optical fibers based on ethylene-vinyl acetate copolymer / Mikromehanička svojstva i termička stabilnost adheziva za optička vlakna na bazi kopolimera etilena i vinil-acetata
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2017)
Optical fibers are used for transfer of information when the reliable system was required, and in some situations it is necessary to transport optical fibers on the drums and to enable controlled and fast unwinding from ...
Preparation of nanocomposites based on thermoplastic polymers and influence of titanium and iron oxides nanoparticles on their properties / Dobijanje nanokompozita na bazi termoplastičnih polimera i uticaj nanočestica oksida titana i gvožđa na njihova svojstva
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
The synthesis of polymer nanocomposites by in situ polymerization of monomers in the presence of filler particles is presented in this dissertation. Nanoparticles of TiO2 and α-Fe2O3 were used as fillers. Polymer nanocomposites ...
The Study of the Enzymatic Synthesis Mechanism of 4,6-Disubstituted 3-cyano-2-pyridones / Proučavanje mehanizma enzimske sinteze 4,6-disupstituisanih-3-cijano-2-piridona
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
In this thesis, the mechanism of lipase catalyzed synthesis of 4,6-disubstituted-3-cyano-2-pyridones was studied, and for that purpose the simplest molecule, 4,6-dimethyl-3-cyano-2-pyridone, and vitamin B6 precursor, ...
Application of supercritical carbon dioxide in fabrication of materials with repellent properties based on pyrethrins / Primena natkritičnog ugljenik(IV)-oksida za dobijanje materijala sa repelentnim svojstvima na bazi piretrina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2018)
This PhD thesis was aimed to investigate the possibility of supercritical solvent impregnation (SSI) of selected polymer materials (cotton fabric, polypropylene (PP) non-woven fabric, polyamide (PA) polymers (fabric, ...
Local approach to ductile fracture of low steel welded joints / Lokalni pristup žilavom lomu zavarenih spojeva niskolegiranog čelika
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2012)
The subject of this dissertation is analysis of ductile fracture initiation and stable crack growth by ductile fracture mechanism in low alloyed steel and welded joints. The analysis is conducted using local approach to ...
Catalytic and non-catalytic methanolysis of triglycerides: Reaction kinetic and process simulation / Katalizovana i nekatalizovana metanoliza triglicerida : kinetika reakcije i simulacija procesa
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2009)
The main obstacle for wider application of biodiesel is its relatively high cost. This is still the truth, although the price gap between petroleum based diesel fuel and biodiesel is narrowing due to the recent increase ...
Surface modification of cellulose fibers using dielectric barrier discharge / Modifikovanje površine celuloznih vlakana primenom dielektričnog barijernog pražnjenja
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2015)
In the theoretical part of doctoral dissertation, the most significant literature data concerning cellulose structure and properties have been systematically reviewed. Special attention has been given to the possibilities ...
Modeling and Energy Optimization of the Catalytic Naphtha Reforming Process / Modelovanje i energetska optimizacija progresa katalitičkog reforminga benzina
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2010)
Catalytic naphtha reforming is one of the primary processes of naphtha refining. This process is used for the production of the primary component of high-octane motor fuels and also for the production of feedstock for ...
Synthesis, characterization and application of undoped and doped nanostructured photocatalysts based on titanium(IV) oxide / Sinteza, karakterizacija i primena nedopiranih i dopiranih nanostrukturnih fotokatalizatora na bazi titan(IV)-oksida
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2013)
Titania (TiO2) due to its photocatalytic activity, chemical and biological inertness, resistance to chemical- and photo-corrosion, non-toxicity, and relatively low cost, is one of the most studied semiconductors for ...