Pretraživanje
Prikaz rezultata 11-20 od 27
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by "hot pressing" method. Alumina-based particles were made ...
Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers
(Public Library Science, San Francisco, 2019)
The processing and characterization of hybrid PMMA resin composites with nano-zirconia (ZrO2) and electrospun polystyrene (PS) polymer fibers were presented in this study. Reinforcement was selected with the intention to ...
Optical properties CaWO4:Nd3+/PMMA composite layered structures
(Elsevier, Amsterdam, 2019)
In this article, we report characterization of the layered composite fabricated from Nd3+ doped calcium twigstate single crystal (CaWO4 :Nd3+) and poly(methyl methacrylate) - PMMA with various organic-inorganic interfaces: ...
Optimization and kinetic modeling of waste lard methanolysis in a continuous reciprocating plate reactor
(Chemical Industry Press Co Ltd, Beijing, 2019)
Continuous biodiesel production from a waste pig-roasting lard, methanol and KOH was carried out in a reciprocating plate reactor (RPR) using a factorial design containing three process factors, namely methanol/lard molar ...
Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air
(Elsevier Ltd, 2019)
The ∼60 nm wide and ∼2 μm long TiO2 nanotubes were obtained by anodization of Ti films sputtered on F-doped tin oxide glass. For N-doping the samples were annealed in ammonia atmosphere. The effect of pre- and post-annealing ...
Synthesis, structural characterization, DFT calculations and antiproliferative evaluation of novel spirohydantoin derivatives containing a substituted benzyl moiety
(Elsevier Science Bv, Amsterdam, 2019)
Two series of cycloalkanespiro-5-hydantoins, namely cyclo-hexanespiro-5-hydantoins and cycloheptanespiro-5-hydantoins with a 4-substituted benzyl or a 2-(4-substituted phenyl)-2-oxoethyl group at N3 position, were synthesized ...
Enhanced Lactic Acid Production by Adaptive Evolution of Lactobacillus paracasei on Agro-industrial Substrate
(Springer, New York, 2019)
The aim of this study was to perform the adaptation of Lactobacillus paracasei NRRL B-4564 to substrate through adaptive evolution in order to ensure intensive substrate utilization and enhanced L (+)-lactic acid (LA) ...
Dimethyl Itaconate Modified PMMA - Alumina Fillers Composites With Improved Mechanical Properties
(Wiley, Hoboken, 2019)
PMMA poly(methyl methacrylate) has a large spectrum of uses as bone cements, in dentistry as denture base materials and other industrial applications. One of the main drawbacks of these materials is the residual monomer ...
In Vitro and In Vivo Biocompatibility of Novel Zwitterionic Poly(Beta Amino)Ester Hydrogels Based on Diacrylate and Glycine for Site-Specific Controlled Drug Release
(Wiley-VCH Verlag Gmbh, Weinheim, 2019)
New (beta-aminoester) hydrogels (PBAE) based on di(ethylene glycol)diacrylate and glycine are successfully synthesized and characterized for the first time in this work. PBAE macromers are obtained using Michael addition. ...