Претраживање
Приказ резултата 21-30 од 43
Sorption of textile dyes from textile wastewater by chitosan-based hydrogel / Sorpcija boja za tekstil iz tekstilnih otpadnih voda pomoću hidrogela na bazi hitozana
(Savez inženjera i tehničara Srbije, Beograd, 2018)
With the excessive risks that are present in today's environment, it is of great importance to treat wastewaters before their discharge in water streams. One of the everyday challenges is design of a low-cost and environmentally ...
Synthesis and properties of nano-hydroxyapatite/poly (methacrylic acid) composite hydrogels / Uticaj neutralizacije na svojstva poroznih hidrogelova na bazi hidroksiapatita i poli(metakrilne kiseline) sintetisanih slobodno-radikalskom polimerizacijom
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Goals. The goal of this study was a development of biocompatible composite hydrogels, structurally similar to native bone tissue, by incorporation of ~60 wt % of calcium hydroxyapatite (HA) into a matrix of hydrogels. Also, ...
Impregnation of cellulose acetate films with carvacrol using supercritical carbon ioxide / Impregnacija filmova acetata celuloze karvakrolom pomoću natkritičnog ugljenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Cellulose acetate films were impregnated with carvacrol using supercritical carbon dioxide. The supercritical impregnation process, conducted in a static regime at pressure of 21 MPa and temperature of 50°C, was optimized ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Examination of the adhesion of polymer composite films based on Bis-GMA/TEGDMA on different metal substrates / Ispitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ...
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...
Adsorption study of cadmium ions on kaolinite modified by histidine and cysteine / Adsorpcija kadmijumovih jona na kaolinitu modifikovanim histidinom i cisteinom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Continuous development of new technologies leads to increasing pollution of water, thus creating the need for new materials that could be used in the processes of its purification. Therefore, adsorbents prepared from ...
Analysis of the influence of structure on mechanical properties of multilayer Ni/Cu thin films for use in microelectronic technologies / Analiza uticaja strukture na mehanička svojstva višeslojnih tankih filmova Ni/Cu za primenu u mikroelektronskim tehnologijama
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Multilayer Ni/Cu thin films were produced by dual-bath electrodeposition technique (DBT) on polycrystalline cold-rolled Cu substrate. Different Ni/Cu multilayer structures were realized by changing of process parameters ...
Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials / Inovativna rešenja u ekstraktivnoj metalurgiji kompleksnih primarnih i sekundarnih sirovina
(Savez inženjera i tehničara Srbije, Beograd, 2016)
Presented compilation of scientific, theoretical and experimental results, promotes an innovative synergy of various metals and industrial activities in metallurgy, resulting in profitable transformation of byproducts and ...
Effect of tracers molecular weight on the release process from alginate microbeads / Uticaj molekulske mase trejserskih indikatora na kontrolisano otpuštanje iz alginatnih mikročestica
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The aim of this paper is to obtain microbeads of natural polymers such as alginate and chitosan. These microbeads were used as potential carriers for the active ingredients so that in this study the diffusion of various ...